Impulse generator control

When the device is properly powered and has a continuous GSM connection, the high-voltage impulse generator of the electric fence can be controlled remotely via the DL Smart system.

This remote control functionality is especially useful in the following cases:

• Service and maintenance mode – during repairs or inspection work, the high voltage can be safely switched off for an unlimited period of time.

• Scheduled fence operation – the impulse generator can be configured to operate automatically according to a weekly schedule, with defined active and inactive time periods for each weekday.

Daily scheduled operation

Each weekday starts at 0:00 and ends at 23:59, with a one-minute time resolution.

All scheduled times are interpreted according to the time zone configured for the specific device. Please note that each DL Smart device can operate in a different time zone.

When the impulse generator control mode is set to “Schedule”, one of the following options can be defined for each weekday:

• Impulse Generator ON – The generator operates continuously from 0:00 to 23:59.

• Impulse Generator OFF – The generator remains switched off for the entire day, from 0:00 to 23:59.

• Scheduled Operation – The generator operates only within or outside a defined time window.

Scheduled operation

In this mode, two time values are configured:

• From (hour : minute)

• Until (hour : minute)

If the “Until” time is earlier than the “From” time, the specified interval is interpreted as a non-operating (OFF) gap, and the impulse generator operates outside of this time window.

Impulse generator state changes

Any change to the impulse generator state (ON, OFF, or Schedule) is applied during the next communication cycle, which occurs approximately every 2 minutes.

If the device temporarily loses its internet connection due to missing GSM signal, the impulse generator will continue operating in the last configured state until communication with the server is restored.